Single Phase SF6 Inductive High Voltage Transformer

Single Phase SF6 Inductive High Voltage Transformer 1. Insul. material: Gas SF6 2. 220kV, 75-300VA 3. L/C or T/T 4. safe

  Single Phase SF6 Inductive High Voltage Transformer

Technical Parameters for JDQXF-220W (1~ 3)  Voltage Transformers

1  Rated voltage  110/√3 kV 

2  Highest voltage for equipment  126 kV

3  Rated frequency  50 (60) Hz

4  Rated secondary voltage

a)  Measuring secondary winding  0.1/√3 kV

b)  Protective secondary winding  0.1/√3 kV

c)  Residual voltage winding  0.1 kV

5  Rated operating pressure of gas SF6   0.40 MPa

6  Minimum operating pressure of the gas SF6  0.35 MPa

7  Rated output and relative accuracy class (cosΦ=0.8 lag)

Winding	Measuring Winding			Protective Winding		Residual Voltage Winding
Terminals Marking	1a-1n		2a-2n	3a-3n		da-dn
Accuracy Class	0.2	0.5	0.5	0.5	3P	3P
Rated Output (VA)	100			150		300
		150			250	300
	75		100		75	300

Note: The thermal limit load for protective winding is 2000 (VA).

8  The system earthing mode is effectively earthed neutral system

9  Arcing distance ≥1010 (mm)

10 Creepage distance of outer insulation please see Table 1

                                             Table 1

Pollution Protection Class	Class II (W1)	Class III (W2)	Class IV (W3)
Creepage Disrancemm	≥2520	≥3150	≥3906

Notes: Detailed technical data and outline drawing are provided upon request.

Single Phase SF6 Inductive High Voltage Transformer